Type of construction

Vulcanized Rubber Upper and Sole.

Height

14 inches (Internal)

Compliance  

CE - European Standard – EN 345-2:1996

Air pressure applied for water leakage testing

50 kPa

Lining Material

Leg Lining : Polyester Brown
                       Weight (min) : 180g/m ²
                       Thickness : 0.60mm

Vamp Lining : Woven Cotton Canvas
                          Weight (min.) 250g/m ²
                          Thickness (min.) 0.60mm

Insole Lining : Woven Sheeting
                           Weight (min.) 140g/m ²
                           Thickness (min.) 0.30mm

Rubber Components

Leg : Alfa Red in colour, 60% Natural Rubber & 40% Styrene Butadiene
          Rubber.

Front & Back Reinforcement : Black in Colour, 70% Natural Rubber &
                                                      30% Styrene Butadiene Rubber

Thickness of Upper and Fabric Combined

1.60mm (Minimum)

Sole / Heel

Black in colour, 100% Nitrile Butadiene Rubber
Oil Resistant - Immersion in iso-octane (22 hours at 22 ºC) 12% max
                           change in volume.
Abrasion Resistant - DIN 53516 : 250mm 3 max.
Hardness Shore A : 70 ± 5.

Steel Midsole

Withstands a force of mare than 1200 Newtons Penetration Resistance and Flex Resistance of 1.5 million Flexes without cracking – CSA Z 195 - 02.

Steel Toe

Tested to withstand 200 Joules Impact and Compression of 15000 Newtos with clearance of more than 15 mm – EN 345-2 : 1996

Chemical Resistant

Upper -Resistant towards mild acids and alkali.
Sole – Resistant towards mild acids.

Finishing

Hypalon Lacquer.

Packing

Polybag 6 pairs / carton.