Type of construction

Vulcanized Rubber Upper and Sole.

Height

15 inches (Internal)

Compliance

CE – European Standard – EN 345-2:1996
CSA – Canadian Standards Association Z195-02
ASTM – American Society of Testing Materials F2413-05 (metatarsal)

Air pressure applied for water leakage testing

50 kPa

Lining Material

Leg Lining : Woven Cotton Canvas
                       Weight (min.) 250g/m ²
                       Thickness (min.) 0.60mm

Insole Lining : Woven Sheeting
                           Weight (min.) 140g/m ²
                           Thickness (min.) 0.30mm

Rubber Components

Leg : Black in colour, 70% Natural Rubber & 30% Styrene Butadiene           Rubber.

Front Reinforcement and Top rating : Yellow in colour, 70% Natural
                                                                    Rubber & 30% Styrene Butadiene
                                                                    Rubber

Thickness of Upper and Fabric Combined

1.60mm (Minimum)

Sole / Heel

Black in colour, 100% Nitrile Butadiene Rubber
Oil Resistant - Immersion in iso-octane (22 hours at 22 ºC) 12% max
                           change in volume.
Abrasion Resistant - DIN 53516 : 250mm 3 max.
Hardness Shore A : 70 ± 5.

Steel Midsole

Withstands a force of mare than 1200 Newtons Penetration Resistance and Flex Resistance of 1.5 million Flexes without cracking – CSA Z 195 - 02.

Steel Toe

Tested to withstand 200 Joules Impact and Compression of 15000 Newtos with clearance of more than 15 mm – EN 345-2 : 1996

Additional Protection

Metatarsal Protected, 102 Joules, Mt 75 – ASTM F 2413-05.

Chemical Resistant

Upper – Resistant towards mild acids and alkali.
Sole – Resistant towards mild acids.

Finishing

Hypalon Lacquer.

Packing

Polybag 6 pairs / carton.