Chainsaw boots
Mining boots
Industrial safety boots
Military boots
| Type of construction | Half Knee height with 2 texture pattern, full black rubber boot was constructed to meet the armed forces requirement. It is a tough boot with reinforced mid interlining, inner polyester lining and cushion insole for comfort. It has an eight eyelets flap for good leg fitting and a non-slip hiker sole for rough terrain and jungle warfare activities. Vulcanized Rubber Upper and Sole |
| Air pressure applied for water leakage testing | 50kPa |
| Lining Material | Leg Lining : Polyester Brown Weight (min) 180g/m ² , Thickness (min) 0.60mm Insole Lining : Woven Sheeting Weight (min) 130g/m ² , Thickness (min) 0.30mm |
| Rubber Components | Upper : Black in Colour, 70% Natural Rubber & 30% Styrene Butadiene Rubber |
| Thickness of Upper and Fabric Combined | 3.4mm (± 2) |
| Sole / Heel | Black in Colour, 50% Natural Rubber, 30% Styrene Butadiene Rubber, 20% Hi-Styrene Rubber |
| Chemical Resistant | Upper - Resistant towards mild acids and alkaline Sole - Resistant towards mild acids |
| Finishing | Hypalon Lacquer |
| Packing | Polybag 6 pair / carton |
Copyright © 2000-2007 Harvik Rubber Industries Sdn Bhd. All rights reserved.