Type of construction

Vulcanized Rubber Upper and Sole.

Compliance  

CE – European Standard – EN 345-1:1992
MS – Malaysian Standard MS EN 345 : 1998

Air pressure applied for water leakage testing

50 kPa

Lining Material

Leg Lining : Woven Cotton Canvas
                       Weight (min.) 250g/m ²
                       Thickness (min.) 0.60mm

Insole Lining : Woven Sheeting
                           Weight (min.) 140g/m ²
                           Thickness (min.) 0.30mm

Rubber Components

Leg and Golosh : Black in colour, 70% Natural Rubber & 30%                                 Styrene Butadiene Rubber.

Top Foxing : Lemon Yellow in Colour, 70% Natural Rubber & 30%                        Styrene Butadiene Rubber

Thickness of Upper and Fabric Combined

1.60mm (Minimum)

Sole / Heel

Black in colour, 100% Nitrile Butadiene Rubber Oil Resistant -
Immersion in iso-octane (22 hours at 22 ºC) 12% max change in
volume.
Abrasion Resistant - DIN 53516 : 250mm 3 max.
Hardness Shore A : 65 ± 5.

Optional Sole Protection

Electric Shock Resistant, meets CSA Z195 – 02 withstands 18kV
with leaking current of less than 1mA for 1 minute.

Steel Shank

Thickness : 0.80mm Double Rubbed.

Steel Toe

Tested to withstand 200 Joules Impact and Compression of
15000 Newton with clearance of more than 15 mm

Chemical Resistant

Resistant towards mild acids and alkali.

Finishing

Hypalon Lacquer.

Packing

Polybag 6 pairs / carton.