Type of construction

Vulcanized Rubber Upper and Sole.

Compliance

CE - European Standard – EN 345-1:1992
CSA – Canadian Standards Association - Z195-02
MS – Malaysian Standard MS EN 345 : 1998

Air pressure applied for water leakage testing

50 kPa

Lining Material

Leg Lining : Woven Cotton Canvas
                       Weight (min.) 250g/m ²
                       Thickness (min.) 0.60mm

Insole Lining : Woven Sheeting
                           Weight (min.) 140g/m ²
                           Thickness (min.) 0.30mm

Rubber Components

Leg : Lemon Yellow in Colour, 70% Natural Rubber & 30%
Styrene Butadiene.
Front and Back Reinforcement : Black in Colour, 70% Natural Rubber 30% Styrene Butadiene Rubber.

Thickness of Upper and Fabric Combined

1.60mm (Minimum)

Sole / Heel

Black in colour, 100% Chloroprene Rubber
Oil Resistant - Immersion in iso-octane (22 hours at 22 ºC) 12%
max change in volume.
Abrasion Resistant - DIN 53516 : 250mm 3 max.
Hardness Shore A : 65 ± 5.

Optional Sole Protection

Electric Shock Resistant, meets CSA Z195 – 02 withstands 18kV
with leaking current of less than 1mA for 1 minute.

Steel Midsole

Withstands a force of mare than 1200 Newtons Penetration
Resistance and Flex Resistance of 1.5 million Flexes without
cracking – CSA Z 195 - 02.

Steel Toe

Tested to withstand 200 Joules Impact and Compression of
15000 Newtos with clearance of more than 15 mm – EN 345-2 :
1996

Chemical Resistant

Resistant towards mild acids and alkali.

Finishing

Hypalon Lacquer.

Packing

Polybag 6 pairs / carton.