Firefighter boots


Chainsaw boots


Mining boots


Industrial safety boots


Military boots

   Firefighter boots

     
     
             
   
Type of construction Vulcanized Rubber Upper and Sole
Compliance

European Standard, CE Approved - EN 345-2:1996
(SP-FP-E-HRO-CI), A29 also available on art 9687L
CSA Z195-02 - Canadian Standards Association
ANSI - American National Standard Z41PT99
Malaysian Standard, MS EN 345: 1988 (SB-P-E-HRO)

Air pressure applied for water leakage testing 50kPa
Lining Material Leg Lining : Woven Cotton Canvas
Weight (min) 250g/m ² , Thickness (min) 0.60mm
Insole Lining : Woven Sheeting
Weight (min) 130g/m ² , Thickness (min) 0.30mm
Rubber Components Upper : Black in Colour, 65% Natural Rubber, 30% Styrene Butadiene Rubber and 5% Chloroprene Rubber
Foxing : Yellow in Colour, 65% Natural Rubber, 30% Styrene Butadiene Rubber and 5% Chloroprene Rubber
Thickness of Upper and Fabric Combined 1.80mm (Minimum)
Sole / Heel

Black in Colour, 70% Chloroprene Rubber, 20% Nitrile Rubber & 10% Natural Rubber
Oil Resistant - Immersion in iso-octane (22 hours at 22°C) 12% max change in volume
Abrasion Resistant - DIN 53516 : 250mm ³ max
Hardness Shore A : 65 ± 5

Outsole Pattern NJV, Black Moulded Sole
Sole Protection Eletric Shock Resistant - Meets CSA-Z195-02,
Resistance to Hot Contact - Meets both NFPA and EN 345-2,
Energy absorption - Meets EN 345-2
Steel Midsole One piece Stainless Steel, Meets CSA-Z195-02 Sole Penetration and EN 345 Flexing test
Steel Toe Meets EN 345 Impact and Compression
Chemical Resistant Upper - Resistant towards mild acids and alkali
Sole - Resistant towards mild acids
Finishing Hypalon Lacquer
Packing Polybag 6 pair / carton
 

Copyright © 2000-2007 Harvik Rubber Industries Sdn Bhd. All rights reserved.