Type of construction

Vulcanized Rubber Upper and Sole.

Compliance

CE – European Standard – EN 345-2:1996
CSA – Canadian Standards Association Z195-02

Air pressure applied for water leakage testing

50 kPa

Lining Material

Leg Lining : Woven Cotton Canvas
                       Weight (min.) 250g/m ²
                       Thickness (min.) 0.60mm

Insole Lining : Binding Sole
                           Weight (min.) 1500g/m ²
                           Thickness (min.) 6.00mm

Rubber Components

Leg : Navy Blue in colour, 70% Natural Rubber 30% Styrene
          Butadiene Rubber

Front & Back Reinforcement : Orange in colour, 70% Natural
                                                      Rubber & 30% Styrene Butadiene                                                       Rubber.

Thickness of Upper and Fabric Combined

1.60mm (Minimum)

Sole / Heel

Black in colour, 100% Nitrile Butadiene Rubber
Oil Resistant - Immersion in iso-octane (22 hours at 22 ºC) 12%
                           max change in volume.
Abrasion Resistant - DIN 53516 : 250mm 3 max.
Hardness Shore A : 65 ± 5.

Steel Toe

Tested to withstand 200 Joules Impact and Compression of 15000 Newtos with clearance of more than 15 mm – EN 345-2 : 1996

Chainsaw Protection

Passed Chainsaw Protection Class 2, EN 345-2, Chain Speed 24 m/sec without cutting through

Chemical Resistant

Upper – Resistant towards mild acids and alkali.
Sole – Resistant towards mild acids.

Finishing

Hypalon Lacquer.

Packing

Polybag 6 pairs / carton.